Skip to content

notomio/atlas

v0.6.0MIT

Read Atlas site topology and prepare Connect and Interact configuration through guided skills and the Atlas MCP service.

configure-conditions

Use when reading, proposing or replacing the initial conditions (CI, start permissives) and permanent conditions (CP, interlocks) of an Interact equipment in Atlas, from a functional analysis or a dictated request. Triggers on "set the start permissives of this pump", "add an equipment interlock", "CI/CP de cet équipement" or "saisir les conditions d'équipement depuis l'AF". Clarify an unqualified CI/CP request; phase or Work Unit conditions use configure-workunit-program. Reads first, writes only the full document the user confirmed; never generates or deploys.

configure-equipment

Use when progressively configuring an Interact equipment in Atlas, associating it with an existing PLC, selecting its standard object, setting typed constants, wiring IO or peer equipment fields, or removing individual bindings. Triggers on "configure this equipment", "wire this motor or valve", "set this input constant", "replace this input's source", "configure cet équipement", or "câbler les entrées et commandes". Preserves unrelated inputs and outputs; never deploys.

configure-plc

Use when preparing an existing Interact PLC in Atlas, choosing or adopting a published standard version, removing its pin, or preparing its source pool before equipment or Work Unit conduct configuration. Triggers on "prepare this PLC", "pin the standard", "adopt version", "remove the pin", "configure le PLC", "choisir la version du standard", "préparer les sources du PLC", "is this PLC generable", "est-il générable", or "composition à blanc". Route phase/GRAFCET edits to configure-workunit-program. Does not create or deploy a PLC.

configure-workunit-program

Use when creating or editing an Interact Work Unit's conduct, phase states, GRAFCET sequences, actions, transitions or phase CI/CP in Atlas. Triggers on "configure la conduite", "crée une séquence Grafcet", "modifie cette étape", "corrige la réceptivité" or "CI/CP de phase". Route equipment CI/CP to configure-conditions and explanations to interact-guide; an explanation authorizes no mutation.

fix-tag

Use when correcting ONE existing Connect signal in Atlas — a single tag or its acquisition — NOT re-seeding a scope. Triggers on "fix this tag", "correct the tag", "rename/retype a signal", "update an acquisition", "fix the polling frequency / address", or "move this tag to another equipment/work unit".

import-register-map

Use when an Atlas employee wants to turn a register table — a Modbus register map, a remote I/O card datasheet, an OPC-UA node list — into the raw points and confirmed IO Manager channels of a data source already linked to an Interact PLC. Triggers on "import this register map", "declare the points of this card", "seed the Modbus points from the datasheet", "importe la table de registres", "déclare les points de cette carte", or "crée les canaux depuis cette table". Never creates or links a data source.

interact-guide

Use when explaining Interact before or during configuration in Atlas. Triggers on "explain PLC and standard version", "what is a point versus a channel", "DI DO AI AO", "Modbus versus OPC-UA", "FC03", "polarity", "raw or engineering value", "scaling", "explique le câblage", "constante, signal IO ou équipement", "explique la conduite de cette Work Unit", "explique le GRAFCET", "que fait la séquence". An explanation request never authorizes a mutation; route conduct edits to configure-workunit-program and equipment CI/CP to configure-conditions.

link-gateway

Use when an Atlas employee wants to link, attach, associate, reconnect, or "rattacher" an existing Connect data source to an existing site gateway — attaching what the gateway collects. Triggers on "link the gateway", "attach this data source to a gateway", "connect the data source to the gateway", "add data source X to gateway Y", "rattache cette data source à la gateway", or any request to make one gateway collect one existing data source.

link-plc-data-source

Use when an Atlas employee wants to give an Interact PLC a field data source to collect — creating a Modbus TCP or OPC-UA source and/or linking it to a PLC. Triggers on "link this data source to the PLC", "add a Modbus source to the PLC", "rattache cette source au PLC", "create an OPC-UA source for the PLC", "make the PLC read this controller", or any request to set up what a PLC collects.

open-page

Use when the user asks to open, show, or share an Atlas page for a site, area, work center, work unit or its conduct, equipment, PLC, data source, gateway, Connect tag/acquisition, Interact point/channel, or initial/permanent condition (CI/CP). Read-only navigation through the connected Atlas MCP, including "ouvre la CI de la pompe", "montre cette gateway", and "donne-moi le lien du tag".

seed-connect-tags

Use when syncing or seeding Connect signals — tags, acquisitions, data sources — for a site's equipment or work units in Atlas. Triggers on "sync the tags", "seed Connect signals", "load the tags for equipment X", or importing a tag list into Atlas.

seed-site

Use when bootstrapping or seeding an ISA-95 site's topology in Atlas — creating a site and populating its areas, work centers, work units and equipment in bulk. Triggers on "seed a site", "bootstrap the topology", "set up site X's areas / work centers / work units", or importing a plant hierarchy.